The EVO/Aftermarket seat bracket suspense date of April 5th

[stealthtt24]

Got my EVO MRs for 900 front and back picked up, muhahahaha.

 

Sweet can't wait I got some pefect condition evo 8 seats I've been wanting to throw In my poor car

 

1) ls2gto............... Stefan..............
2) 4DSC................. Nick................
3) Garfield Wright...... ditto...............
4) Jesse W.............. Jesse...............YES
5) Dusty Duff........... Mike................YES
6) 4thStroke............ Spencer.............YES
7) dmj.................. Dexter..............
8) ejc.................. Edgardo.............YES
9) stealthtt24.......... Mark................YES
10)nijasan.............. Nathan..............YES
11)Street Surgeon ...... Cory................YES
12)moduleunknown........ Dave................YES
13)streetmasters........ JZ..................YES
14)thecman02............ Chris...............YES!!!
15)joel150.............. JOEl................
16)KGVR4................ Dorel...............YES
17)Talon................ Jonathan............YES
18)telecaster........... Norman..............YES
19)Jasonvr4............. Jason...............YES
20)uncleben4rice........ Junius..............
21)Charles.............. Charles.............YES
22)Slobra............... Mike................YES
23)mountaineerjeff...... Jeff................
24)boosdtalon........... Josiah..............YES
25)Muskrat.............. Brian...............YES
26)Tsiboy............... Alex................YES
27)Mr_Wolfy............. Wolfy...............YES
28)JSchleim18........... Jeremy..............YES
29) Gvr4-330............ Rob.................YES
30)RaptorReed........... Tim.................YES
31)1941galant........... Hill................YES
32)Berzerker 9...........JOEL................YES
33)Romanova..............Tyler...............Yes
34) Tre3zy...............Triztane............

just had to update my name bucuse I changed it

 

[curtis]

Bolt store called be going up there after they get back from lunch. That is all.

 

 

[G]

It's xmas in feb!

 

[raptorWagon]

Happy Galant VR-4 day!

 

[curtis]

Well we're done.

2 5 gallon buckets of chips and another full of scraps and its over.
Each set has 8 angle brackets and two rear bars
1 run of 68 pieces
1 run of 68 pieces backside
1 run of 34 pieces
1 run of 34 pieces backsade
2 runs of angle cuts for the rear bars 34 times
total of 816 slots cut
136 rough cuts of angle
136 rough cuts of square bar
So guys I have about 5 to 6 hours in each set not counting writing 9 different machine language program.
Set includes
4 3/16 inch aluminum angle brackets for the floor with slots
4 1/8 inch aluminum angle brackets for the seats
2 straight bars with tig welded on brace

Hardware includes
4 nuts for up front with washers for the front bracket
4 socket head bolts with nylon washers for the rear bar
4 socket head bolts with washers and nuts for the seats short up front
4 socket head bolts with washers and nuts for the seats long for rear
4 socket head bolts with washers and nuts for the front brackets (shortest)




Total price is 192.76 shipped , packaged, paypal fees, hardware everything plug and play with logo on drivers side. I'm bagging up hardware in individual sets now and still need to run the logos but can do it over the weekend. I still need to get the tooling set up. I'll start shipping Monday, each set will come in heavy cardboard tubes to your door. I'll send tracking numbers out when they ship. I know I quoted alot less but that's when it was thin steel cut on a chop saw and not individually cut pieces on the mill. This is as cheap as i can sell them and still make a profit. Hope everyone understands. I'll have alot of emails I'm sure and have alot of other things going on right now and will get back to you.


My paypal is [email protected]. Thanks Guys.

 

ill be sending payment first thing in the morning!!

thanks again man went above and beyond what i expected !!!

 

Wow to rich for my blood I'm tana have to back out on this one I dident think it would be that expensive sorry Curtis there's one spot open for someone now

 

[izze01]

I will give Curtis a bump on these for an excellent final production piece, I have been here almost everyday watching and helping him with whatever i could, we just got done bagging up all the hardware and getting things ready for shipping, as many people will think man that is a little high well you will not find a better deal for the quality that you will be receiving.
Great job Curtis!!!

 

Payment coming your way C. Awesome job on getting these done so well. The time & dedication it took for you to get these done is way above & beyond what I expected /ubbthreads/images/graemlins/worthy.gif
u-d-man /ubbthreads/images/graemlins/applause.gif

 

[boostx]

Quoting Berzrker_9:
Wow to rich for my blood I'm tana have to back out on this one I dident think it would be that expensive sorry Curtis there's one spot open for someone now



Sparco, Momo or Bride Seat Bases mount to the factory holes $80 +
Sparco, Momo or Bride UNIVERSAL Seat Slider Track Set $75 +
This is at least $155 per side so that’s $300 + for the pair and those are not aluminum and the height cannot be adjusted.
So for under $200 is a sweet deal..

 

[tsiboy]

/ubbthreads/images/graemlins/blush.gif a bit more than i anticipated. can I have a week or so to come up with the extra funds??? still very interested and well worth the quality.

-alex

 

[4thStroke]

1) ls2gto............... Stefan..............
2) 4DSC................. Nick................
3) Garfield Wright...... ditto...............
4) Jesse W.............. Jesse...............YES
5) Dusty Duff........... Mike................YES
6) 4thStroke............ Spencer.............YES..............PAID
7) dmj.................. Dexter..............
8) ejc.................. Edgardo.............YES
9) stealthtt24.......... Mark................YES
10)nijasan.............. Nathan..............YES
11)Street Surgeon ...... Cory................YES
12)moduleunknown........ Dave................YES
13)streetmasters........ JZ..................YES
14)thecman02............ Chris...............YES!!!
15)joel150.............. JOEl................
16)KGVR4................ Dorel...............YES
17)Talon................ Jonathan............YES
18)telecaster........... Norman..............YES
19)Jasonvr4............. Jason...............YES
20)uncleben4rice........ Junius..............
21)Charles.............. Charles.............YES
22)Slobra............... Mike................YES
23)mountaineerjeff...... Jeff................
24)boosdtalon........... Josiah..............YES
25)Muskrat.............. Brian...............YES
26)Tsiboy............... Alex................YES
27)Mr_Wolfy............. Wolfy...............YES
28)JSchleim18........... Jeremy..............YES
29) Gvr4-330............ Rob.................YES
30)RaptorReed........... Tim.................YES
31)1941galant........... Hill................YES
32)Berzerker 9...........JOEL................YES
33)Romanova..............Tyler...............Yes
34) Tre3zy...............Triztane............

 

Quoting Boostx:
Quoting Berzrker_9:
Wow to rich for my blood I'm tana have to back out on this one I dident think it would be that expensive sorry Curtis there's one spot open for someone now



Sparco, Momo or Bride Seat Bases mount to the factory holes $80 +
Sparco, Momo or Bride UNIVERSAL Seat Slider Track Set $75 +
This is at least $155 per side so that’s $300 + for the pair and those are not aluminum and the height cannot be adjusted.
So for under $200 is a sweet deal..




I just need the seat bases. I already have sliders
Are these seats brackets hight adjustable?
Well anyways I don't have the funds for these so someone else jump on these.

 

[moduleunknown]

Payment sent. Thanks for all the hard work and making things easier for me! /ubbthreads/images/graemlins/tongue.gif. Can't wait!

 

This is why I would have taken a down payment before I would have started making them. Its too easy for people to back out when they have nothing invested. They don't understand the amount of work it takes to write the code, find a way to hold them in a jig while your cutting them, the amount of time it takes to come up with a design(that works), to find the hardware, and to go above and beyond with the logo. All of this and you didn't take a dime for a deposit, it was all out of his own pocket.

This is the reason why you don't see people going out of there way to make one off stuff for the Galant's. Too many flakes.

For the people that are paying, my hats off to you. Since Curtis is an outsanding member here, I would recommend sending the payment as a gift to throw a couple extra bucks his way.

 

[stealthtt24]

Im still in!!! Sending money in the next few days....

 

[stealthtt24]

Actually, got a few more bucks than I thought, directtv will have to wait, money sent!!