nickbuilt
Well-known member
If you search Forced Performance's website, you will NOT find this turbo. They no longer manufacture it. The idea behind this turbo was to create an excellent street turbo with great spool characteristics while still outflowing the conventional mitsu style turbo's (16g/18g/20g).
This turbo uses FP's FP30 style turbine housing. It is a much better design than the OEM mitsu housing, but still bolts up to a stock (style) exhaust manifold. Additionally it has two v-band flanges for the o2 housing and external wastegate. The o2 housing v-band is 2.5" and the EWG is meant for a Tial 44.
The center cartridge is a garret model: 757197-4
Also, Ludachris over on the DSMTuners forum did a thread about installing this turbo as well as did a review and answered some questions. There is good information on this turbo in that thread. link below!
(http://www.dsmtuners.com/forums/turbo-system-tech/262886-forced-performance-fp3150-dual-bb-turbo-installed.html).
I personally made 419awhp on this turbo @30 psi on pump gas this turbo is in mint condition no shaft play or smoke only reason it came off is because I went with a billet 6262 t3 setup!
Setup includes:
FP3150 turbo w/ water line fitting
Tial 44mm external wastegate (black in color)
FP 2.5" vband o2 housing and vband dump tube
FP race manifold
Pics and dyno graph will be up tomorrow!! Will not part out kit! I want 1,100 for the setup shipped let me know if your interested!
-nick
1-347-299-6119
[email protected]
This turbo uses FP's FP30 style turbine housing. It is a much better design than the OEM mitsu housing, but still bolts up to a stock (style) exhaust manifold. Additionally it has two v-band flanges for the o2 housing and external wastegate. The o2 housing v-band is 2.5" and the EWG is meant for a Tial 44.
The center cartridge is a garret model: 757197-4
Also, Ludachris over on the DSMTuners forum did a thread about installing this turbo as well as did a review and answered some questions. There is good information on this turbo in that thread. link below!
(http://www.dsmtuners.com/forums/turbo-system-tech/262886-forced-performance-fp3150-dual-bb-turbo-installed.html).
I personally made 419awhp on this turbo @30 psi on pump gas this turbo is in mint condition no shaft play or smoke only reason it came off is because I went with a billet 6262 t3 setup!
Setup includes:
FP3150 turbo w/ water line fitting
Tial 44mm external wastegate (black in color)
FP 2.5" vband o2 housing and vband dump tube
FP race manifold
Pics and dyno graph will be up tomorrow!! Will not part out kit! I want 1,100 for the setup shipped let me know if your interested!
-nick
1-347-299-6119
[email protected]
Last edited:
