GalantVR4.org The Mitsubishi Galant VR-4 Forum
Galant VR-4 Forums » Marketplace » Parts For Sale » FS: Big Brake kit 12.19" Aluminum Hats, 3000gt Sumitomo Calipers $400 plus ship
Previous thread Next thread

FS: Big Brake kit 12.19" Aluminum Hats, 3000gt Sumitomo Calipers $400 plus ship


Bimmubishi
giant log


Galant VR-4 org Post #: 1238869 posted 08/02/17 07:02 PM     Remind Me!  Send Private Message   Edit Post      
I have a front brake kit for sale from my Evo II- I've been using it at the track for a long time and the car has reached a state of development that requires more than this. I'm asking $400 for the following parts:

2 sets of rotors and hats. One set used, the other never used (kept as spare) Rotors are Circle track, commonly available for $30 bucks hats are 6061 alu CNC
3 sets of front brake pads, various compounds, all used but good. Endless, Hawk and EBC
Calipers (good condition no problems being sold with fresh dust seals)
Brackets- CNC steel brackets and hardware. Beefy, proven.

Other details:
One set of hats is drilled for 4 bolt AND 5 bolt. The new, spare is only 5 but could obviously be changed to 4 as well
These should fit GVR4 and DSM no problem. All the other brake parts swap over AFIK.
There is a photo below that also shows rear calipers. Those are for sale also but not as a part of this package.

Best to Email me at [email protected] rather than PM here. I will take a front set of Evo 8 brake calipers in trade for this stuff if anyone has them.

The whole deal is probably a couple K to make on your own. The pads alone cost more new than what I'm selling this whole setup for.


Thanks

Alex






Edited by Bimmubishi (08/03/17 08:59 AM)

Posts: 5693 | From: Boston, Massachusetts | Member Since: 07/15/03 | IP: (71.174.206.111) | Report this post to a Moderator

Bimmubishi
giant log


Galant VR-4 org Post #: 1238870 posted 08/02/17 07:04 PM     Remind Me!  Send Private Message   Edit Post      
I will also include CAD drawings used to make this stuff as well as all replacement part numbers for sourcing spares.

Posts: 5693 | From: Boston, Massachusetts | Member Since: 07/15/03 | IP: (71.174.206.111) | Report this post to a Moderator

Philth
Newbie
1915/2000


Galant VR-4 org Post #: 1238871 posted 08/02/17 07:32 PM     Remind Me!  Send Private Message   Edit Post      
What size wheels are needed to clear these?

Posts: 7 | From: Ottawa, ON | Member Since: 07/10/17 | IP: (2001:56b:9fff:9c) | Report this post to a Moderator

G
obsessed with the turds of others
486/1000


Galant VR-4 org Post #: 1238873 posted 08/02/17 07:36 PM     Remind Me!  Send Private Message   Edit Post      
Oh snap.



www.japanesenostalgiccar.com
www.nostalgic.co.jp

Posts: 8791 | From: zompton | Member Since: 02/24/04 | IP: (75.86.151.204) | Report this post to a Moderator

Bimmubishi
giant log


Galant VR-4 org Post #: 1238876 posted 08/03/17 08:57 AM     Remind Me!  Send Private Message   Edit Post      
Well well well

Posts: 5693 | From: Boston, Massachusetts | Member Since: 07/15/03 | IP: (50.206.9.156) | Report this post to a Moderator

GSTwithPSI
A hole
820/1000
1837/2000



Galant VR-4 org Post #: 1238877 posted 08/03/17 09:10 AM     Remind Me!  Send Private Message   Edit Post      
So the rotors are custom made?



820/1000
1837/2000
1546/2000-SOLD
1813/2000-SOLD

Posts: 3220 | From: Annapolis, MD | Member Since: 01/02/12 | IP:
(2600:100a:b11f:f) | Report this post to a Moderator

Bimmubishi
giant log


Galant VR-4 org Post #: 1238882 posted 08/03/17 12:54 PM     Remind Me!  Send Private Message   Edit Post      
Nope, the rotor hats are though. I designed the hats to fit low-cost circle track rotors so they are easily replaced.

I've been using this kit for years and I'm still on the original rotors. Replacement rotors are between 30 and 75 dollars depending on vein type and brand.

Posts: 5693 | From: Boston, Massachusetts | Member Since: 07/15/03 | IP: (50.206.9.156) | Report this post to a Moderator

Bimmubishi
giant log


Galant VR-4 org Post #: 1238883 posted 08/03/17 12:55 PM     Remind Me!  Send Private Message   Edit Post      
Phith, I had them under 16" volk TE37s originally. Two things to consider, the barrel shape, offset and spoke pattern. Usually the expensive forged wheels have an accommodating barrel. Short answer, it will fit some 16" wheels and all 17" wheels provided they don't have a weird spoke pattern.

Alex


Edited by Bimmubishi (08/03/17 12:56 PM)

Posts: 5693 | From: Boston, Massachusetts | Member Since: 07/15/03 | IP: (50.206.9.156) | Report this post to a Moderator

G
obsessed with the turds of others
486/1000


Galant VR-4 org Post #: 1238884 posted 08/03/17 01:34 PM     Remind Me!  Send Private Message   Edit Post      
Where you been man?



www.japanesenostalgiccar.com
www.nostalgic.co.jp

Posts: 8791 | From: zompton | Member Since: 02/24/04 | IP: (50.193.76.1) | Report this post to a Moderator

Bimmubishi
giant log


Galant VR-4 org Post #: 1238885 posted 08/03/17 02:56 PM     Remind Me!  Send Private Message   Edit Post      
My car's been parked until this hillclimb at Mt Washington this summer. I did a reprep and a bunch of work to it and after doing the event I realized that I can probably hit one event a year without disrupting my life too much. Been cycling a lot, working a lot..

Posts: 5693 | From: Boston, Massachusetts | Member Since: 07/15/03 | IP: (50.206.9.156) | Report this post to a Moderator

Philth
Newbie
1915/2000


Galant VR-4 org Post #: 1238888 posted 08/03/17 06:07 PM     Remind Me!  Send Private Message   Edit Post      
Quoting Bimmubishi:

Phith, I had them under 16" volk TE37s originally. Two things to consider, the barrel shape, offset and spoke pattern. Usually the expensive forged wheels have an accommodating barrel. Short answer, it will fit some 16" wheels and all 17" wheels provided they don't have a weird spoke pattern.

Alex




Sounds good. I've got a set of 15" SSR Type-Cs. Unfortunately dont think theyd clear despite an accommodating barrel.

Posts: 7 | From: Ottawa, ON | Member Since: 07/10/17 | IP: (67.193.6.249) | Report this post to a Moderator

Bimmubishi
giant log


Galant VR-4 org Post #: 1238892 posted 08/03/17 08:54 PM     Remind Me!  Send Private Message   Edit Post      
Those are awesome wheels but probably pushing it on the diameter, sadly.

Posts: 5693 | From: Boston, Massachusetts | Member Since: 07/15/03 | IP: (71.174.206.111) | Report this post to a Moderator

FlyingEagle
Doesn't Match Anything


Galant VR-4 org Post #: 1238911 posted 08/05/17 11:34 PM     Remind Me!  Send Private Message   Edit Post   
Philth, you have mail. Essentially I have nearly new wheels for sale locally, that were only used to try out the 17" platform on my Colt, that could work for you.

Bimmubishi/Alex, posting this to see if this will move your parts down the road.
They look like capable parts indeed!

If 17x7.0 offset +40 CB 73mm, 4x114.3/4x110 would work, the pics are in your inbox.

Could be a temporary solution, with resale down the road as a long term goal to move to more genuine racing wheels.

My setup is using outboard mounted Galant rotors with large aluminum spacers to center the rotors and wheel outboard, so my spacing was a little different even with 4 pot Wilwoods in place. I just clear stock 91 style GVR4 rims, Galant rotors using Wilwood 120-5081 calipers and custom 7075 aluminum powdercoated spacers and calipers adapters.



Posts: 1484 | From: THE Ottawa | Member Since: 03/05/05 | IP: (68.171.77.46) | Report this post to a Moderator


Pages: 1
Previous thread Next thread

Extra information
2 registered and 33 anonymous users are browsing this forum.

Galant VR4.org Moderator:  4orced4door, curtis, steve, atc250r, jcgalntvr4-244, cheekychimp, jepherz, Rausch, toybreaker 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 340

Rate this thread


News & Events: News | Events
Galant VR-4: Newbies | General VR4 Discussions | Technical Discussions | How To and Info Archive
Marketplace: Parts For Sale | Cars For Sale | Good Guys | Bad Guys
Community: Members' Showcase

Contact Us | Privacy statement GalantVR-4.org

Generated in 0.129 seconds in which 0.086 seconds were spent on a total of 14 queries. Turbo powered.



Hertz's Galant VR-4 Page