I’m in need of three U-joints to repair my driveshaft. If anyone has some laying around or can point me in the right direction to find some please comment here. TIA

What year accord is this from?

I have two Stock OEM galant VR4 rims Looking to get $20 each for them Pick up only! Glendale Heights IL

I have two drivers side head lights looking to sell them for $90 each buyer pays shipping of their choice. Plastic interior piece that goes below the ECU passenger side $30 plus shipping

Are you selling the Bonnet?

The injector size was at 450 I believe before I had to change them, the car was running really lean to the point where it would start and stay running for about 3 seconds tops.

Okay so I got into Link on the laptop and I scaled the injectors and set up the correct size injectors and now the car runs great! Thanks for all the help guys really appreciate it!

Fixed

This makes sense. I tried to start the car with an almost dead battery a month ago, so I then bought a new battery, I reached out to my tuner who tuned my car back in 2020. Thanks for this information I would of never guessed that.

Okay so today the new cable came in and I plugged it in and it works! Well the cable works and I can now log and look into the ECU, but seems like my tune is gone and the ecu some how reset itself. So now I’m going to try and learn how to use ecmLink. I got the car started up and my wideband was...

The price is Best Offer, message me with offers

I’ve changed the map sensor and the fuel pump is only 2 years old, it’s a walbro 525 Hellcat with the require kit, I’ve gone through the wires on the fuel pump and the relay is new and I checked and cleaned the grounds so still at a lost, I should have the new ECM link cable today fingers...

Yeah I’m not looking to trade, I’m slowly trying to empty out all my parts, in need of money, sorry.

Price drop to $250 plus shipping

I bought these from a guy in Malaysia E39a RS hood vents in decent condition $280 plus shipping or OBO

I found a spare ISC Sensor that I had in my parts pile, don't know if it's good or bad, so anyway I took off the one that was on the car and swapped in the other ISC, and yet again the car will start up for a brief couple of seconds and then stall off, like the fuel just shuts off. Then I...

Here is the underside of the ECU board

Here is a picture of the ecu that was in my car. The caps look good but I can’t tell what I’m looking at for the drivers part. Maybe someone can see something I don’t.

This helped a lot thank you so much!!

How do I make sure the ISC is not bad? You’re talking about the ISC on the throttle body correct? Or do you mean the ISC driver inside the ECU?

Yeah I’m just waiting for the new cable to come in, and when I get the cable if it still doesn’t connect to my laptop then I’m sending in the ECU to get looked over and fixed by ECMTuning, time is not a concern, thanks for the advise

Should I just send in my ECU to ECMtuning and have them go over it?

I looked at the caps and they looked fine I didn’t see any acid coming out from them, I will post a pic of the ecu later today for you to look at maybe I missed something

I just ordered a new ecmlink cable and will have it in the next 3-4 days so after I get the cable I will post again with more information

Here is a video I made of me trying to start it just two times. I guess I’m just going to get a new ECM cable for my labtop and when I look at the data I will reach out here again for help. No more throwing parts at it, I agree

The car seems to stall when it goes to closed loop, but then again I need to get a new ecm cable, so after I get the new cable I will see if I can look at the log in the car. I noticed that my radiator hoses are pressurized like the car has been running hott but it has been sitting for 6 months...

So when I crank it over and it starts the rpms will get right up to a little over 2100rpms and then when i put my foot on the gas petal the cars idle drops straight to zero and turns off, and last time i tried to start it i gave it 50% throttle and rpms drop fast and the exhaust will make one...

So your saying if I email ECMTuning.com and tell them about the cable not working they will send me a new one? I hope your right because it would save me so much time trying to diagnose this issue I'm having. and with your issue did you replace your ISC/FIAV sensors? and did that fix it?

Yeah I put 5 gallons of fresh 93 octane in the tank, I also for one of my spare CAS and hooked it up and the car started and I got to rev it up two times up to around 2100 rpms and then its like the car chokes on no fuel, I installed FIC 1220 Injectors a little over 2 years ago maybe I should...

I do have ECMlink v3 but when I plug it into my labtop the light on the little box connected to the cable will light up for a split second and then turn it, like it connects for a split second then nothing and when I click “connect” on my laptop to connect so I can look at the values it won’t...

So I had my Galant sitting for 5 months since I don’t drive her in the winter here in Chicago, but once every month I would start it up and let it warm up for about 5-6 mins, about a month ago I went to start her up again and my battery was dead, so I had to jump start it and she started up and...

I have evo seats in my galant. I think they look nice, only thing is the gap where they meet by your Butt isnt so good. I'll post some pics of them tomorrow. the previous owner told me they where RSSL Evo Seats. correct me if im wrong, but the seats have the Headrest on the top of the seats.The...

yeah i'll just stick with the oem bulbs, dont want to follow the honda crowd thats for sure! Thanks for all your guys opinions! i do like those 93 projectors thou! looks nice!

thanks for your help, i want hids so bad they would look sick!

What is a good brand of HID's that i could install on my Vr4? i need some help i dont know what ones to get. I was thinking of the 6000k ones. If any of you guys that have a HID kit on your galant please let me know what is a good brand. Thanks Shane

Fixed

thats one crazy roll cage your fabricating! good job and good luck with the building!!

No need

#1380

thank you, i was thinking just new washers i didnt even think about the o ring,

i noticed today after warming up my VR4 that i have some power steering fluid leaking from the 17mm nut that connects the line on top of the pump. so i cleaned it all off and made it look dry, then started it up again and noticed it was wet again!!! from the top of the pump where the line is...

i drive my VR4 everyday to a from work, right now in chicago its like 28 degrees and my car loves this weather!!

the car starts up just fine, What and where is this IOD located? my brakelights dont work when i push the brake, but the tail lights do work,

would it hurt if i just make a new ground for the bottom fuse box?? not to good on electric, need some advice

all my dsm friends are telling me to look at my MPI relays??

i will look at that, i think i have a short between the alt to the fuse box by the petals, what would be the best way to find it?

Problem fixed

I am interested, i should have a paypal account by next week.

here what my starter looked like i put in a new one and still makes the noise, i havent looked at the flywheel yet, but i just picked up a used OEM Flywheel, i dont have an inspection plate on my trans so im going to look at the flywheel aanother day, and the noise just came out of nowhere one...

when i turn the key to start the motor dosent sound too good, i hear 2-3 hard clunking sounds coming from the starter it sounds like. i checked my starter bolts and their on there nice and tight, the starter dosent jiggle at all its on there pretty good, dose this sound like my starter is...