I'm down to help I'm probably about ten minutes from you. I think you might still have my cell number ? 631 384 4390. I think I might have to pay my bill though. Lol

Just some images from underneath .

Thanks , I'm in Holbrook across from the sachem library. But as far as what fpr is on the car it's adjustable. Il take some more pics of underneath and interior today and put them up after work .

I have the lap belt , but nothing for the electric shoulder belt . The previous owner claimed to have them but stopped contact with me after two weeks of me owning the car. I was also supposed to get the oem seats.

My plans next for it are an FP green setup. I already have a new FP manifold but I had clearance issues with the j pipe and the way my Ic pipes are set up. I would like to get my hands on some stock seats and seat belts as well.

Bill Marino at Bmar auto in farmingdale ny did my subframe bushings . A lot of bur bits, and torch sessions to get them out. The subframe was cleaned primed and painted upon reinstall. I'm sure you will have the same issue .

Hi guys. I havnt been on in a while but ive done alot in less then a year I guess. I was just going to share some photos.I did dsmlink v3 with SD setup, replaced rear subframe mounts,driveshaft carrier bearing mounts,new rims ,new tires 225/45/16 falken 452,new j pipe gasket,new...

Hi guys. I was trying to do some research and I couldnt come up with anything. Im trying to see if the injectors (660) that I am running are ok for an FP green setup.I dont know the boost level i would have it set for cause im not sure if its safe to run that turbo with my injectors or if i...

Sorry cant post pics right now . I picked up a bosch unit and it has a 4 prong connector as the ngk unit that is in my car has a 2 prong conector. Also the bosch is a 4 wire and mine is a 2 wire. I dont have a check engine light but the car is running a tit bit rich. The resson why I am changing...

I didnt kow to put this post in the tech or newb section but I figured here. My o2 sensor that sits in the o2 housing is done. My problem is is that I have a gvr4 with a ful jdm,dsm swap including the harness so the new sensors that are avalible to me do not have the correct conection for the...

The job you did so far with the I/C pipes looks fantastic. Great build man.

Is there a quality diffrence in the swain unit and the punishment piece.?. I know the swain is thermal coated but it is also alot cheaper.stm offers both.

I agree with you wop. Im just going to get a new o2 housing from stm.

Here is a pic of the clean up I have done so far.

The noise level really does not bother me to much. But what i was concerned about was if there would be more turbulence or a boost creep issue without the dump. But would that only be concerned with cars with bigger turbos and higher levels of boost?.I have a full 3in system with no cat and a mbc.

Hey guys. I have done a good amount of maintenance to 1829 since I got it back in may. Replaced the intake Mani gasket, t-belt water pump,balance shaft belt,replaced faulty wires to the safc replaced the maf housing with a brand new g.m unit,replaced most of the intercooler pipes,new tb...

I gave my evo rear seat to bill at bmar.

Been doing the maint on it , t-belt ,water pump,balance shaft belt.2 new hub bearings, poly rear subframe bushings. replaced some faulty wires from the maf harness. 4 new 225/50/15 nittosall around,resurfaced rotors. the car runs great and pulls hard Im so happy with it .

Im in the middle of my tb being replaced. Once that is out of the way im going v3. I did alot of searching and I just wanted to ask since the car is a dd and will be tuned for the street will I be happier with the overall driveability of the car?.I guess what im asking is if there is a big...

(A) looks like a wastegate acuator or(N75 valve) from a 1.8t.

Does not matter what the drop is,as long as it drops it from stock. Coilovers,springs and struts,does not matter. Thanks.

Wound up being a faulty connection on the maf harness. the car has a GM air meter on it. But I have plans to remove it. Now il do some cleaning up and show some more pictures.

That was an old gasket. I gave up after a week and a half of frustration. The car got flatbeded to bill. Lets see what happens. Thank you guys for all the help. This place is alot more friendlier then vwvortex.lol. I used to be a 1.8t freak.

Just was wondering if anyone had a fresh sealed or fairly new tb with gasket.

Am I ordering the wrong gasket then? The same gasket applies for 91 gvr4,eagle talon,laser, etc.. ? I was just wondering cause I got this gasket from the parts place we deal with at my job but it doesnt have the ports circled out as per the one above. So I was wondering if I was using the wrong...

Thanks for showing me that image. This is the way i had the old gasket on.I just ordered the new one wich i will have tomorow.But did i have the gasket on correct. btw the rtv will be cleaned off .

I ment to say heavy rain..not heavy reasson..lol. Damm slide keyboard.

I did clean the tb with a wiz wheel just to knock off all the old liquid gasket funk. I also cleaned the highlighted areas in red with a rag and break clean. I just ordered a new gasket for the tb and il be able to install again tomorow due to the heavy reason we have been having here. Just to...

Thanks for all the help guys. I tried to pull whatever code or codes it had tonight but the scanner wasnt getting any power wich was weird. But thank you for the tb pic. I think I might have the gasket on upside down.. Tomorow when I take lunch I will snap a pic on how I have it set.

I applied the bl tester to the inlet on the 16g. Should I be placing on a charge pipe before the tb insted?. I should have been more clear wich im sorry for but I changed both gaskets on back to back days. Throttle body first. After that was done is when I first noticed the lean idel. Next day...

Where is the ecu located on this 91. And il just be looking for leaking caps ?

He is willing to help but me not showing him the car cant do much. It does start and idle fine but it just runs lean. It feels like it would be a bad maf sensor but previous to me changing the gaskets it seemed to be fine. Idk

Hey guys new here..1st post new.. I picked up 1829 from nj. Car ran fine ,but I decided to do some maint on it due to it having liquid gasket everywhere so I startec with an intake mani gasket and tb gasket. Put it back together and now the wideband is reading 11.2 shortly aftet a start up and...